Business Plans…

Category: Industrial & Manufacturing

Different Oil Surface Mining Techniques

The number of oil surface mining techniques are very limited. However, there are different combinations that can be conducted using some equipment to make this process a success. Some of these extractive techniques oversee the removal of the rock that bears the oil. It’s removed and later processed elsewhere. All the potential oil surface mining techniques can be categorized into the following categories. 

Terrace Mining

This is a technique that involves the removal of the overburden. This piece is excavated using heavy machines and then transported. The material collected around the pit is then dumped inside the pit where the ore was excavated. Terrace mining technique is quite complex. It requires a reasonable tubular deposit with a vast areal extent. 

Other than the two mentioned factors, the technique is considered quite flexible. The barriers set for terrace mining are generally because of the economic stripping limit ratio. 

Strip Mining

This technique entails the removal of the overburden. The removal is conducted using an excavating machine that then directly transports the material. The extracted material is taken through excavation and then dumped in the exact area from where the ore was extracted. 

According to experts, strip mining is a suitable method for all tubular deposits that are shallow dip or flat. The shallowness of the pit should at least be 10 degrees. The maximum overburden depth is not allowed to be more than 150 fits. The general depth pit shouldn’t exceed 200 fits. 

The strip limits of various mine operations are always determined by the capacity of the equipment applied. 

The Open Pit Method 

According to experts, there are various reasons laid down as to why thermal enhanced oil recovery method can’t be successfully used in some reservoirs in the manner the open pit method is applied. This technique basically entails the removal of waste materials. The waste is conveyed out using dumper trucks, trains, and conveyors. These equipment dump waste outside the excavation area. 

Mostly, the topography of the area permits to haul the waste bumps. These levels are always achieved. However, there are some topographies that don’t allow this. Open pit methods have the utmost flexibility compared to all the other systems. However, it is a costly method to practice. 
When it comes to the open pit method, there are limits of operations and they are directly determined by the economic stripping ratio. 

Terrace and Strip Mining Combination 

This specific method involves the removal of the overburden material. The removal of the material is overseen by terrace mining. The final cutting of the ore is overseen by strip mining. Experts have approved that this method is dependable as it’s able to reach greater depths than the normal terrace mining technique. 

The reason behind this is that the last phase of mining using stripping mining technique is quite cheap. Terrace mining is then applied to handle the excess material that the dragline is not able to get rid of. 

Extraction of oil using mine openings doesn’t approve a clear and complete recovery. For a thorough recovery, the rock acting like a rock reservoir should be removed to the surface for processes like treatment which is conducted and then returned to the ground openings to cover cave-ins.


Continue Reading

Metalworking/Industrial Lubricants and Oils

Known otherwise as cutting oils, it is a type of lubricant used exclusively for engineering and industrial work. Most commonly, these oils are used for metalworking and classified as a “metalworking fluid” or cutting oil. There are a variety of types of lubricants going by what many might consider technical or advanced names such as “Form EV 4” or “Starform P40 S”. The difference between them all, however, is the fact that within each oil type are distinct contents that give a different result for the specific job. 

In a bottle of Form 925 CAS, this oil is a transformer oil, meaning it can withstand high temperatures and has exceptional insulating properties. This forming oil is used mainly for wire drawing and thread tapping. The contents within it allow for tools to be de-greased with ease, prevents sticking, and as a transformer oil can withstand high temperatures. 

Within a bottle of Form EV, this oil is used for stamping, forming, shaping, cutting and various other techniques on metal. This oil comes with low viscosities allowing it to be a simple process to work with when a user tries methods of dripping or rolling. In addition to the benefits of forming EV oils, they come as non-toxic and have no features like that of a water-based solution or conventional deep drawing oils. As a result, Form EV oils don’t cause irritation on skin and don’t cause corrosion on metals. Additionally, the oils keep surfaces and materials clean after treatment because of it non-effectiveness to dust. When buying from online or other spots, customers can get oils in packaging sizes of five liters which is quite common or raise the amount to twenty, sixty, two hundred and ten, and one hundred liters. 

What are the Alternatives and Development? 

When it comes to other businesses, competitors, or others looking to find ways to enhance the use of the oils, others have developed a multi-purpose lubricant. Compared to the other listed types of oils, the goal is to create an item used in the field of metal working that does all the jobs in one. One of the main reasons and ways this multi-purpose lubricant is relevant is to reduce the amount of consumption. 
Cold forming applications alone was stated to be at a 90% consumption. In earlier years this number, however, has dropped gradually. 

With any multipurpose instrument comes the need and convenience for it to be compatible as the other individual oils are. The multipurpose oil is able to accelerate separation between contaminants and results in the removal of abrasive metallic particles. The benefits of this lubricant are like the others, but because of its multipurpose, there is the clear reduction of costs and spending on numerous other oils, an improved lifetime for tools as well as cleaner tools. 

Finding Different Dealers and Suppliers 

Most dealers for these oils are highly professional. They well equipped with the tools to help customers. On many sites, consumers can find data sheets and contact forms to help them find the perfect selection.


Continue Reading

The Benefits of the Scrap Metal Industry

Since the turn of the 21st century, there has never been a bigger response to cleaning up the world that we live in. Many different working industries have done their part tidying up their environments but, maybe none have been as beneficial as the scrap metal industry. To say the least, the amount of good this industry has done is far overlooked. Here are some of the benefits provided by the scrap metal industry. 

Saving Energy 

Slowly but surely, our world is becoming more energy efficient by the day. Well, when it comes to scrapping metal, the numbers show that the industry has accounted for energy savings of up to 75%. How this is done can simply be compared to how recycling paper helps cut down trees. Additionally, the numbers are more impressive when we realize how this is certainly a big chunk of the collective energy saving methods we use today. 

Reducing Air Pollution 

Unfortunately, we have been detrimental to the quality of the air we breathe since the industrial revolution. While we may have seen progress in other areas since that time, air pollution is an area that many people agree may be getting worse. The scrap metal industry helps in this area by limiting the amount of metal that ends up in landfills. In other words, the less metal that ends up in landfills, the better the air quality around those landfills is. According to research, this has added up to over 85% reduction in air pollution. 

Money In Your Pocket 

Not only does the scrap metal industry benefit in the form of a healthier environment, but it also contributes to a healthier, or, wealthier wallet. When we take another look at the statistics, the numbers show that the industry has been in steady downfall in all areas. This also includes the number of employees working in this industry. However, common folk has taken the scrap metal industry as a lucrative side hustle. In fact, nationwide, there are probably more people finding and scrapping metal as a part-time job than a full-time career. This is especially the case in places rich in throwaway metal. Take, for example, the city of Minneapolis which is known for having scrap metal pick up Minneapolis mn.

The Future Of Scrapping Metal 

Predicting the future is always just that, a prediction. Its fun to guess where an industry such as the scrap metal industry will be a few years down the line but, we almost never know for sure. That being said, All signs point to a future that is absolutely free of this industry. With the inventions of lighter, stronger, and reusable metals, it’s certainly looking like we are in the final stages of an old industry. Also, seeing as how scrapping metal was a necessary step in the advancement of the industrial and manufacturing industries, it says a lot about how much this industry has done.


Continue Reading

Keeping Memories Alive Through Film Preservation

Film preservation and restoration is an art form. When done properly, these two interlinked processes can capture the visuals and movement of a bygone era and preserve them for future generations. The process takes expert knowledge and skill. Over the years, tested methods of preservation kept valuable film stock intact for years to come. 

What is Film Preservation? 

Film preservation and restoration involves applying several tested methods to rescue and restore movies and documentaries. A team conducts the restoration process and may include historians, archivists, and other experts. Aside from stopping the effects of deterioration on the film stock, it also involves digitally duplicating the content of the film. Some of the film stock that had been preserved by experts includes silent-era films and documentaries produced in the earlier part of the 20th century. 

Historical archivists and other experts who are involved in film preservation and restoration also emphasize the need to ensure community access to the material. This is important especially for movies and documentaries of great historical value. Duplication allows the content to be accessed by students, researchers, film enthusiasts, and others without necessarily opening the original film stock. Over time, filmmakers and film companies have started to understand the importance of preserving their films for historical documentation and other purposes. 

Basic Guidelines for Film Preservation 

The earlier methods of creating films involve using materials that can decay over time. A typical film material in the early years of the industry may be cellulose-based or polyester-based and require careful storage and handling. Images embedded in a film are also produced from a combination of heat and photosensitive dyes that may be affected by external environmental factors, such as chemicals, pollutants, and airborne particles. 

In order to properly store the film, several basic guidelines are often recommended by experts. First, the storage room should be clean, dust-free, dry, and cool. Since films are heat and light sensitive, avoid storage rooms where temperatures could fluctuate. While it may sound basic, winding the film securely into the film core is also important. The film should be evenly winded into the core before storage. 

Using Film Cores for Preservation 

Film cores are cylindrical pieces without a projecting rim and are typically made from a plastic-based material. For those who are looking for a source in Kentucky, search for film cores Louisville KY. Taking the time to properly store an important film could prevent added restoration costs in the future. 

A film core is made from polypropylene or polymer-based plastic that has a wide industrial application. As a tough material, polypropylene is acid-resistant and base resistant. This makes it perfect as a foundation for making film cores. Once the film is evenly winded into the core, it can be safely placed in its container. 

Films are moving historical records. So, preserving and restoring film is important sp that society can have a connection to the past. By using a combination of methods in film preservation and storage, these moving images could survive the test of time.


Continue Reading

Why You Need to Invest in Some Military-grade Fasteners

Purchasing military grade fasteners will aid your machine and hardware stay in top-notch status; you don’t have to worry about the inherent risk of commercial fasteners. They conform to higher standards and must abide by military standards. Machinery or other hardware has a very demanding operation condition, malfunctioning isn’t an option. All components must perform optimally and in perfect congruity. After all, it’s the fasteners that keep hardware components intact; you wouldn’t want hardware parts dissembling after two weeks of utilization. 

Why Military Grade? 

All military fasteners are all about quality material, versatility, and durability. The overall design also matters a lot. If you perform a comparison between the conventional fasters and the military grade type, you will learn that they are advanced. They can endure long-term exposure. 

How to Buy Military-grade Fasteners 

Before going ahead with your purchase, you ought to perform a thorough audit of your industrial machinery to figure out the fasteners you require. Of course, you need to certify that the OEM parts you are buying are a perfect fit for your industrial machinery. With appropriate compatibility, you get excellent performance, and that is what everyone is looking for. What is the material of the fastener? Well, if your industrial hardware is mostly exposed to hot or chilly conditions, you ought to settle on one that won’t budge under such circumstances. So, what do you need to consider when you are buying military grade fasteners? There are some important variables you need to keep in mind: 
• What’s the primary use of the hardware? Will be industrial hardware be under continuous vibration? If so, choosing quality material that can endure such conditions is integral. 
• Choose finish based on function: The finish must befit the purpose; this component can easily give way if not appropriate. The finish’s hardness needs to be according to the product design. 
• The price: Don’t cut corners here; a few dollars might cost you massive expenses in repairs and shortcomings in your industrial operations. It isn’t worth it. 

Ensure Perfect Functionality 

If you want your fastener to offer you the best service, you need to recalibrate your machine frequently. Get in touch with your manufacturer to learn when to perform the calibration. If your industrial hardware is still under warranty, then you can get free calibration services. Only utilize the appropriate equipment to install your fasteners. Your aim here is to get much torque as well as precision. Probably you don’t have a single clue installing fastener; leave it to the professionals. 

There are numerous varieties of military-grade fasteners in the market that are used in different applications. Partner with a trusted supplier to ascertain that you settle on the right hardware for your application. It is integral that you get a fastener with the perfect structural strength to satisfy industrial hardware specifications. The installer needs to look at the implementation of the industrial hardware to figure out the ideal means of achieving the best results.

Continue Reading